Magnetrol Jupiter JM4, Operating Manual

Page: 121 / 124

41-621.1 HART ® to Modbus ® Adaptor Operating Manual
121
Error
Code Model 706 Model JM4 Model R96
1 Software Error SW Error (Main) Software Error
2 RAM Error RAM Error (Main) RAM Error
3 ADC Failure ADC Error (Main) ADC Failure
4 EEPROM Error EEPROM Error EEPROM Error
5 Analog Board Error CoP in Flash Mode Analog Board Error
6 Analog Output Error SW Conflict (CoP) Analog Output Error
7 Spare 1 Spare 1 Spare 1
8 Default Parameters Analog Board Error Default Parameters
9 No Probe SW Error (CoP) No Antenna
10 No Fiducial RAM Error (CoP) Spare 2
11 No Echoes ADC Error (CoP) No Fiducial
12 Upper Echo Lost Spare 2
Too Many Echoes
13 Spare 2 Analog Ouput Error
Safety Zone Alarm
14 EoP > Probe End No Probe
Echo Lost
15 Level Below Probe End Probe Memory Error
Spare Indicator 3
16 EoP Below Probe End Probe Info Corrupt
Configuration Conflict
17 Safety Zone Alarm Spare 3
High Volume Alarm
18 Config Conflict New Probe
Spare Indicator 4
19 Hi Volume Alarm Default Parameters
Initializing
20 Hi Flow Alarm No Float Detected
Configuration Changed
21 Spare 3 Spare 4
Spare Indicator 5
22 Initializing Config Conflict
Ramp Slope Error
23 Analog Output Fixed Hi Volume Alarm
High Electronics Temp
24 Config Changed Spare 5
Low Electronics Temp
25 Spare 4 Extra Float Detected
Calibration Required
26 Spare 5 2nd Float Missing
Echo Rejection Invalid
27 Spare 6 Initializing
Spare Indicator 6
28 Ramp Interval Error Config Changed
Inferred Level
29 Hi Elec Temp Spare 6
Adjust Analog Output
30 Lo Elec Temp Xmtr Calib Req'd
Low Supply Voltage
31 Calib Req'd Spare 7
Spare Indicator 7
32 Echo Rej Invalid Temp Calib Req'd
Spare Indicator 8
33 Spare 7 Hi Elec Temp
Marginal Echo
34 Inferred Level Lo Elec Temp
Hi Surface Velocity
35 Adj Analog Output Spare 8
Spare Indicator 9
36 Totalizer Data Lost Spare 9
Spare Indicator 10
37 No Probe Target Adj Analog Output
Sequence Record
38 Low Supply Voltage Low Supply Voltage
39 Dry Probe Spare 10
40 Spare 8 Lo Echo Strength
41 Lo Echo Strength Lo Ifc Echo Strength
42 Lo Ifc Echo Strength Hi Noise / LvlThresh
43 Spare 9 Hi Noise / IfcThresh
44 Spare 10 Spare 10
45 Sequence Record Sequence Record
Note: Diagnostics mapped to the NE 107 Failure category will appear as a LM Error, those mapped to other
categories will appear as a LM Warning.