44
41-621.1 HART
®
to Modbus
®
Adaptor Operating Manual
13.4.23
Right-click on the Comm DTM Project item and select Connect.
13.4.24
Right-click on the Comm DTM Project item and select Additional functions\Scan list. The
DTM will scan for attached device, sending a HART Command 0 with an address of 63.
Receipt of that command by the HMA will cause it to reboot into the Normal operating
mode.
13.4.25
Shut down PACTware.
13.4.26
Open the Modbus Poll application.
13.4.27
Select Connection\Connect from the Modbus Poll menu bar, ensure that the connection
settings are as follows, and then click OK. Note that the USB Serial Port setting needs to
match the port number for the communication cable that is being used.
.
Summary of Contents for Jupiter JM4
Page 2: ......
