41-621.1 HART
®
to Modbus
®
Adaptor Operating Manual
101
19.5.18
In the Navigation Bar, click on Physical Data Point(s), and expand the 1-Floating Point
Value item.
19.5.19
Double click on the Table 1 Item 5 entry, and change Descriptor #1 to ‘Blk Dist’ and
Engineering Unit to correspond to the level units in use by the HART transmitter to be
read.
19.5.20
Enter the value to be sent to the device in the Current Value textbox.
19.5.21
Click on Apply to send the settings to the AutoPILOT PRO.
19.5.22
Right click on the Slave 1 Blk Dist entry in the Navigation Bar and select Copy.
Summary of Contents for Jupiter JM4
Page 2: ......
