Mace HVFlo XCi, Product Manual

Page: 222 / 255

My meter " Total " isn't right
Symptom Cause Remedy
My meter total "creeps" up
Normally occurs due to moving
water - leaky gate, foot valve
Check seals of gates and
valves. Consider installing a
second gate to isolate the sys-
tem.
Entrapped aquatic life in pipe Adjust " Filters " using
Water "sloshing" in pipe around
sensor level
Make sure water level recedes
fully, or pipe stays completely
full. Consider installing a
second gate to isolate the sys-
tem.
Electromagnetic interference
(EMI) causing false "flow"
Find source of EMI and rectify
if possible
My total is not increasing Total channel set up as " Neg-
ative only "
Check " Total " in
My total is not decreasing Total channel set up as " Pos-
itive only "
Check " Total " in
I can't reset the total
Total channel has been set up
as " Non-resettable "
Check " Total " in
My total "rolls over" too
quickly
Total units are too small for
application
Change total units to larger
units
My total is wrong!
Total units are not what's expec-
ted
Check total units in
Total has "rolled over" without
me realising it!
MACE XCi User Manual - 222 -