Mace HVFlo XCi, Product Manual, Page: 112 / 255

7. Right-click on the Site name
and
Request Enter Host Comms Session
.
After a short period where the remote comms session is being connected to the device, will
prompt for the XCi device password to be entered as usual.
8. Since during a remote session, is talking to the XCi device via the MDS, there may be a
noticeable lag between sending a command and receiving a response. In this case, will give
the user an indication that communications are being established.
Normal communications can now be undertaken using as usual.The majority of functionality
that can be accessed when using a local connection with may also be accessed during a
remote session, however, certain functionality may be restricted. For example, making changes to
certain Webcomm settings.
NOTE: Should the user (and therefore the connection) be inactive for 15
minutes, a warning will appear in the Windows Notification centre and on the
screen of . If no action is taken, the XCi device will be Started with
it’s last Applied settings and Disconnected from the MDS.
MACE XCi User Manual - 112 -