Mace HVFlo XCi, Product Manual

Page: 229 / 255

3. If applicable, the other cards will be updated with a similar process. You will be asked to confirm each
cards update process. Each card update will be run separately. For example, if you have more than
one Doppler card, you will be asked to confirm the update process for each card.
4. After all cards have been updated to the firmware versions listed, the program will confirm that the
update is complete.
5. You will be returned to the “ Flo Series3 Updater ” dialogue box. Click “ Finished ” to exit from the
program.
After the upgrade
1. " Connect " to the HVFlo XCi device with .
2. Re-configure your instrument, either by " Load settings from file " or by completing a new
configuration " Edit settings ".
3. Ensure the system is operational and all sensors are "Calibrated".
4. Click “ View totals ” and re-enter the total values recorded prior to the upgrade (if desired).
5. Click " Start device " and "Exit" from
MACE XCi User Manual - 229 -