Mace HVFlo XCi, Product Manual, Page: 212 / 255

"Measure and Display" function
The " Measure and Display " function enables the user to check that all XCi channel types configured are
"working". This function will update the channel values based upon the longest time period that a particular
channel configuration requires to ouput a value. For example, if a depth sensor requires a 25 second "warm-
up", then the values will be updated every 25 seconds. If a Doppler " Velocity " channel requires 30 seconds
to calculate a velocity, the the values will be updated every 30 seconds and so on.
1. From the " Edit configuration settings
" dialogue, click “
Measure and Display
” and the “
View
measurement
” dialogue box will open.
2. Click " Start " and the progress bar at the top will begin to advance every second.
3. After all " Channels " have been received and/or calculated the " Channel " values will be updated.
4. Click “ Stop ” then ” Close ” to return to the " Edit configuration settings " dialogue.
NOTE: " Total " channels are not updated in " Measure and Display "
For a short video of the procedure click " Play "-
MACE XCi User Manual - 212 -