Mace HVFlo XCi, Product Manual

Page: 119 / 255

Edit XCi Channels
Once the required channels have been added, they must then be edited to ensure that the measured values
are meaningful.
WARNING: All configured channels MUST be edited prior to starting the XCi
device. Editing the channel/s enables the correct configuration information to be
sent to the controller module.
1. From the main “ Device Settings ” dialogue box click “ Configure channel ” and the “ Configure
channels ” dialogue box will appear.
2. Highlight the channel you wish to edit and click “Edit
”. A channel specific “
Edit channel
” dialogue
box will appear.
3. Edit the settings in the “ Edit channel
” dialogue box to suit your application as per the
recommendations in
XCi Channel Types
. In all cases, the "
Edit Channel
"dialogue box provides
information of:
l
" Channel path " - This describes the channel type and the card input source.
l
" Channel name " - This is the name given to the channel by the user when added to the
configuration .
l
" Decimal places " - The user can set the number of decimal places (0, 1, 2, 3) using the drop
down list box. Data can be logged with these decimals in the data file .
4. Click “ Apply
” to save the settings and return to the “
Configure channels
” dialogue box.
MACE XCi User Manual - 119 -