Mace HVFlo XCi, Product Manual, Page: 91 / 255

order to “re-trigger” the alarm. For example, if an irrigation pump has been started when 0 ML is on the
totaliser and you wish to be alarmed whenever there has been 50 ML pumped, the “
Send the
alarm.....above
” should be set at 50 and then the “
Add this value....occurs
” should also be set at
50. With this function irrigators can be notified when to shut off pumps/close gates etc.
After the alarm has been sent disable it for:
When an alarm has been sent, this “
Disable
” function means that the alarm will not be re-sent for the
period of time selected from the drop-down list. For example, if the velocity reaches 1m/s and you do
not wish to be alarmed again one day, then “
1 day
” would be selected from the drop-down list. If the
alarm is cleared (via the “
Clear
” set point described above) and then re-triggered, an alarm WILL NOT
be sent again until the one day period is over.
Send an SMS message to these phone numbers:
Alarms can be sent as SMS messages to mobile phones. An unlimited number of phone number
recipients can be added to an alarm. FULL phone numbers including international country code must
be entered in the field provided. Leave the form blank if you do not wish to send SMS alarms
WARNING: The recipients of SMS alarms from the MACE Data Server MUST
be registered users of the MACE website.
Limit SMS message size:
When configuring an alarm, the number of credits used to send the particular alarm can be
ascertained and limited:
l
Each SMS of 160 characters or less = 1 alarm credit per recipient
l
Each SMS of 161-306 characters = 2 alarm credits per recipient
l
Each SMS of 307 - 459 characters = 3 alarm credits per recipient
Send an email message to these addresses:
Alarms can be sent as email messages. An unlimited number of email recipients can be added to an
alarm. Enter the email address of the alarm recipient in the field provided. Leave the form blank if you
do not wish to send email alarms
WARNING: The recipients of email alarms from the MACE Data Server MUST
be registered users of the MACE website.
MACE XCi User Manual - 91 -