215585
88
Revision A
4.8.3
Installing Hydraulic Lines and Hoses
Hydraulic hoses distribute hydraulic fluid to the various components on the pull-type.
NOTE:
Refer to
10.4 Torque Specifications, page 184
for torque details.
$
%
Figure 4.65: Alignment Valve Fitting
1.
Retrieve steel lines and hoses from shipping bag.
2.
Place a container or rag under the fitting on the hitch
swing cylinder to catch oil.
3.
Remove existing fitting (A) from the block.
4.
Remove cap (B) from tee fitting.
IMPORTANT:
Ensure O-ring is in place.
$
%
&
'
Figure 4.66: Alignment Valve Fitting
5.
Retrieve ORFS-6 x ORB-6 connector (B) from the shipping
bag and install at location (A).
NOTE:
Ensure that the direction arrow on check valve (D) points
away from tee fitting (C).
