215585
64
Revision A
$
%
&
Figure 4.9: Lift Cylinder Lock-Out Valve and
Adjuster Bolt
11. Close lock-out valve (A) on each rotary disc pull-type lift
cylinder by turning the handle to the horizontal position.
Repeat on opposite side.
12. Turn adjuster bolt (B) to set dimension (C) to 130 mm
(5 1/8 in.). Repeat on opposite side.
•
Turn bolt clockwise (towards spring) to increase float
•
Turn bolt counterclockwise (away from spring) to
decrease float
$
%
Figure 4.10: Adjuster Bolt Cover Plate
13. Reposition cover plate (A) over float spring adjuster bolt as
shown. Secure cover plate (A) by tightening bolt (B). Repeat
on opposite side.
