215585
52
Revision A
$
%
Figure 3.106: Header Lighting
–
Left Side
8.
Install light assembly (A) onto the header left end with two
M10 x 20 carriage bolts (B) and lock nuts from the
shipping bag.
NOTE:
Ensure the amber lamp faces the front of header and
reflector faces outboard.
Installing Left Transport Harness
$
%
&
'
(
Figure 3.107: Harness Routing
1.
Retrieve transport harness (A) from the shipping bag.
2.
Route connectors P201 and P202 on the end of harness (A)
to cover support (D).
3.
Using a draw tape or equivalent, route connectors P401
and P404 on the other end of harness (A) through
opening (B) at front of carrier to opening (C) adjacent to
center-link.
4.
Route the harness until the plugs reach left light
assembly (E) on the header.
'
(
&
$
%
Figure 3.108: Harness Connection
5.
Connect plug P301 (A) from harness (B) to receptacle
P202 (C) on harness (D) (supplied with kit).
NOTE:
Plug P301 (A) was disconnected from the lighting module.
6.
Connect plug P201 (E) on harness (D) (supplied with kit)
into the lower output receptacle on the lighting module.
