215585
45
Revision A
$
%
Figure 3.90: Alignment Valve Fitting
1.
Retrieve steel lines and hoses from shipping bag.
2.
Place a container or rag under the fitting on the hitch
swing cylinder to catch oil.
3.
Remove existing fitting (A) from the block.
4.
Remove cap (B) from tee fitting.
IMPORTANT:
Ensure O-ring is in place.
$
%
&
'
Figure 3.91: Alignment Valve Fitting
5.
Retrieve ORFS-6 x ORB-6 connector (B) from the shipping
bag and install at location (A).
NOTE:
Ensure that the direction arrow on check valve (D) points
away from tee fitting (C).
