215585
202
Revision A
ü
ü
Item
Reference
Check that cutterbar doors are unbolted from center
channel frame, shipping wire is removed from cutterbar
curtains, and cutterbar curtains are hanging properly.
6.5 Unpacking Curtains, page 121
Grease all bearings and drivelines.
7.2 Lubrication Points, page 131
Check conditioner roll timing gearbox lubricant.
8.7 Checking and Adding Lubricant
Check rotary disc pull-type roll timing gearbox lubricant.
8.8 Checking and Adding Lubricant
Check forward and rear swivel gearbox lubricant.
8.9 Checking and Adding Lubricant
Check cutterbar lubricant.
8.10 Checking and Adding Lubricant
Check cutterbar area carefully for loose parts and
hardware on the cutterbar.
WARNING
These objects can be ejected with considerable force
when the machine is started, and may result in serious
injury or machine damage.
—
Run-Up Procedure
8.17 Running up the Header, page 160
Check hydraulic hose and wiring harness routing to ensure
adequate clearance when raising, lowering or swinging
the header.
—
Check that tail lights and hazard lights are functional.
8.15 Checking Lights, page 158
Post Run-Up Check
–
Stop Engine
Check belt drive for proper idler alignment and
overheating bearings.
8.3 Checking Conditioner Drive Belt, page 139
Check for hydraulic leaks.
—
Check that header manuals are in storage compartment.
8.16 Checking Manuals, page 159
Date Checked:
Checked by:
