215585
10
Revision A
$
%
Figure 3.3: Top Shield
–
Left of Center-Link
4.
Remove four M10 hex head bolts (A) and flat washers, and
remove top shield (B).
CAUTION
To avoid injury, keep fingers clear of opening at base of anchor.
$
%
&
'
Figure 3.4: Center-Link Anchor
–
Right of Center-Link
5.
Remove cotter pin (B), washer (C), and shipping tag (D).
6.
Remove pin (A) from center location and lower forks on
forklift.
NOTE:
Pin should slide out freely. Adjust forklift fork or move
carrier frame until pin is loose. Do
NOT
use hammer to
remove pin.
$
%
&
Figure 3.5: Center-Link Anchor
–
Right of Center-Link
7.
Move the carrier frame and anchor so pin (A) can be
installed in the working location. Install pin (A) and secure
with washer (B) and cotter pin (C).
