215585
164
Revision A
$
%
Figure 9.1: Drawbar Jack in Working Position
3.
If equipped with a drawbar hitch:
Turn the handle on jack
stand (A) to raise the stand. Remove pin (B) and stand (A).
$
%
Figure 9.2: Drawbar Jack in Storage Position
4.
If equipped with a drawbar hitch:
Move jack (A) to the
storage position on the side of the hitch, align the
mounting holes, and secure with pin (B).
$
%
Figure 9.3: Two-Point Hitch Jack in Working Position
5.
If equipped with a two-point hitch:
Raise the rotary disc
pull-type slightly off the ground using the tractor. Remove
pin (B) and stand (A).
