215585
42
Revision A
Installing Transport Alignment Control
$
%
&
Figure 3.83: Alignment Controls
–
Front Right View
1.
Remove cam assembly (A) from shipping support (B).
2.
Remove nuts (C) from the cam assembly.
$
&
%
Figure 3.84: Alignment Control
–
Rear Right View
3.
Secure cam assembly (A) onto hitch swing cylinder plate (B)
with bolts and nuts (C). Torque nuts (C) to 58 Nm (43 lbf·ft).
NOTE:
When installing cam assembly (A), check for hose twisting.
If required, loosen hose fitting to allow hose to untwist.
Torque fitting when complete.
$
%
&
Figure 3.85: Alignment Control
–
Rear Right View
4.
Check travel of cam arm (A) by sliding it in and out of cam
assembly (B).
NOTE:
If the cam arm does
NOT
slide easily, loosen valve
mounting bolts (C) and position valve (B) at the top of the
mounting holes. Retighten valve mounting bolts (C).
