215585
8
Revision A
4.
Raise hitch off deck, back up until unit clears trailer, and slowly lower to 150 mm (6 in.) from ground.
IMPORTANT:
Take care not to contact the other machine if load is two-headers wide.
5.
Take to storage or assembly area, and set hitch down securely on level ground.
6.
Repeat for second hitch (if required).
7.
Check for shipping damage and missing parts.
$
%
Figure 2.2: Unloading Rotary Disc Pull-Type
8.
Approach rotary disc pull-type (A) from back with forklift (B)
as shown, and slide forks as far as possible into pallet.
NOTE:
Pallet is designed to be lifted from the backside only.
9.
Raise rotary disc pull-type off deck.
IMPORTANT:
Take care not to contact the other machine if load is
two-headers wide.
10. Back up until unit clears trailer, and slowly lower to 150 mm
(6 in.) from ground.
11. Take the machine to a storage or set-up area, and set
machine down securely on level ground.
NOTE:
When possible, approach from the backside to minimize
potential for contacting the unit.
12. Repeat for second rotary disc pull-type (if required).
13. Check for shipping damage and missing parts.
IMPORTANT:
Do
NOT
remove rotary disc pull-type from pallet until instructed.
14. Unload remaining pallets and boxes, and take to assembly area.
