215585
39
Revision A
Installing Transport Valve
NOTE:
Cover support bracket removed from illustrations for clarity.
$
%
&
Figure 3.74: Selector Valve
1.
Retrieve valve assembly (A) from the pallet.
2.
Position valve assembly (A) on the carrier hitch pin plate
as shown.
3.
Install two M20 x 65 bolts (B), hardened washers, and nuts.
4.
Retrieve two M10 x 20 bolts from the shipping bag and
install bolts at location (C) with threads facing up. Install
nuts, but do
NOT
tighten.
5.
Torque bolts (B) to 461 Nm (340 lbf·ft).
$
&
%
Figure 3.75: Support Plate
6.
Install support plate (A) and secure it with bolts (B).
7.
Install bolts (C), but do
NOT
tighten.
$
%
&
'
Figure 3.76: Support Plate
8.
Remove nut (A) from support (D).
9.
Install bolt (B) through support (D) and support (C), and
then reinstall nut (A).
