215585
125
Revision A
6.6.2
Installing Discharge Shield
–
No Conditioner
Discharge shields may need to be removed for machine service, but a rotary disc pull-type without a conditioner should
NOT
be operated without the discharge shield.
%
$
Figure 6.39: Rotary Disc Pull-Type with Transport
1.
Raise the rotary disc pull-type fully and extend the center-
link to maximize the space between field wheels (A) and
carrier frame (B).
$
Figure 6.40: Lift Cylinder Lock-Out Valves
–
Closed
Position
2.
Close lift cylinder lock-out valves (A) on both sides of the
rotary disc pull-type. Valve handles should be in the closed
position (90° angle to the hose).
$
Figure 6.41: Shield Rotated
3.
Rotate shield (A) and pass it between the field wheels and
the carrier frame toward the rotary disc pull-type.
