![background image](http://html.mh-extra.com/html/macdon/m1170nt5/m1170nt5_unloading-and-assembly-instructions_685724066.webp)
215634
52
Revision B
1034351
B
A
C
Figure 3.29: Caster Wheel Bracket
21. Remove and discard bolt, nut, and washer (A) securing
shipping bracket (C) to the caster wheel.
22. Remove bolt and washer (B) and shipping bracket from the
caster wheel extension. Retain the hardware.
1034353
A
B
C
D
E
Figure 3.30: Narrow Transport Stop
23. Insert narrow transport stop (A) through guide slot (B),
as shown.
24. Secure narrow transport stop (A) to caster wheel
extension (C) with bolt (D) and two washers (E) as shown.
Torque to 330 Nm (243 lbf·ft), keeping the guide centered
on the caster wheel extension.
NOTE:
Reuse the he bolt and washers retained from Step
.
1034356
A
B
Figure 3.31: Narrow Transport Stop
25. Apply more grease to the bottom of the caster wheel
extension and then insert caster wheel extension far
enough to be able to move stop bracket (A) from storage
position into field position as shown. For reference, the
stop plate on the narrow transport stop should be
approximately 340 mm (13 in.) (B) from the walking beam
stop plate. This position will allow for optimal wear pad
installation.