215634
113
Revision B
4.1.3
Checking Engine Air Intake
The engine air intake must be clear and all its components properly secured for the engine to work correctly.
1015818
A
A
B
Figure 4.6: Engine Air Intake
1.
Check all engine air intake ducting (A) for looseness.
Tighten the hose clamps as required.
2.
Check that end cap (B) is secure.
1023020
B
C
D
A
Figure 4.7: Constant Torque Clamps
3.
Check three constant torque hose clamps (A) and spring
clamp (B) on the turbocharger intake duct. Clamp (B) is
properly tightened when screw tip (C) extends beyond the
housing and Belleville washers (D) are almost flat.
4.1.4
Checking and Adding Hydraulic Oil
The hydraulic system will not work correctly if the hydraulic oil level is too low or too high.
WARNING
Avoid high-pressure fluids. Escaping fluid can penetrate the skin causing serious injury.
