215634
56
Revision B
1034382
A
B
C
Figure 3.41: Left Shimmy Shock Mount
8.
Retrieve left shimmy shock mount (A).
9.
Remove and retain bolts and nuts (B), and reflector
bracket (C) from shimmy shock mount (A).
1034379
A
B
C
D
Figure 3.42: Shimmy Shock Mount
–
Left Cab-Forward
10. Position shimmy shock mount (A) on the left caster wheel
extension and secure it with four bolts and nuts (B)
retained in Step
11. Install reflector bracket (C) using two bolts (D) and a nut on
the shimmy shock mount (A) and shimmy base support.
NOTE:
The outboard edge of the dampener bracket should be as
flush as possible with the shimmy base support on the
extension to keep the dampeners aligned.
12. Tighten the nuts on bolts (B) and (D) to 170 Nm (125 lbf·ft).
1034380
A
B
C
D
Figure 3.43: Shimmy Shock Dampener
–
Left Cab-
Forward
13. Attach the barrel end of anti-shimmy dampener (A) to the
forward spacer hole location (B) in the shimmy shock
mount with one M16 x 150 flange head bolt (C) and one
M16 tech lock nut (D). Do
NOT
fully tighten.
