215634
145
Revision B
1034125
B
A
Figure 4.74: Transport Control Buttons
16. To retract the walking beam, press and hold REEL AFT
button (A) on GSL.
17. To extend the walking beam, press and hold REEL FORE
button (B) on GSL
18. Repeat Step
to Step
five times to
ensure it is working properly.
1034130
Figure 4.75: Exit Transport Operation Warning
19. When complete, exit the narrow transport control page by
pressing button F5 or F6 again (whichever is active). The
exit transport operation warning will display on the HPT.
NOTE:
Press F5 or F6 on the console, or HOME or RETURN on the
HPT to cancel transport operation at any time.
20. Shut down the engine, and remove the key from
the ignition.
1034108
A
B
Figure 4.76: Transport Locks
21. Reinstall lock pins (B) into the drive wheel legs.
22. Turn the walking beam lockout valve (A) to the closed
position (90 degrees from the valve).
