215634
166
Revision B
1014802
A
Figure 5.17: GSL
DANGER
Ensure that all bystanders have cleared the area.
22. Start the engine and press HEADER DOWN switch (A) on
the GSL to fully lower the header.
1015851
A
B
Figure 5.18: HPT Display
23. Press rotary scroll knob (A) on the HPT to highlight the
QuickMenu options.
24. Rotate scroll knob (A) to highlight HEADER FLOAT
symbol (B), and press the scroll knob to select it.
1022842
A
B
C
Figure 5.19: HPT Display
25. Turn scroll knob (A) to highlight left (B) or right (C) float and
press knob (A) to activate the selection.
26. Rotate scroll knob (A) to adjust the float setting and press
the knob to confirm your selection.
IMPORTANT:
Float adjustments of 1.0 (out of 10) change the header
weight at the cutterbar by approximately 91 kg (200 lb.).
Adjust the float in increments of 0.05 to fine-tune the
header
’
s performance.
27. Shut down the engine, and remove the key from
the ignition.
28. Grasp one end of the draper header and lift. The lifting
force should be 357 N (80 lbf.) and should be the same at
both ends.
29. Proceed to
