215634
140
Revision B
1034138
A
Figure 4.64: Narrow Transport Menu
5.
On the Tire Selection page, scroll and select NARROW
TRANSPORT radio button (A).
6.
Press the HOME button on the HPT to exit the Setup Menu.
Adjusting Header Settings on Harvest Performance Tracker
Before operating the header, ensure that the Harvest Performance Tracker (HPT) settings are appropriate for your header.
1018929
A
B
Figure 4.65: Header Settings
1.
Navigate to the SETTINGS menu using soft key 5 and the
HPT scroll knob. For instructions, refer to
Harvest Performance Tracker, page 135
.
2.
Scroll to SET-UP HEADER option (A) and press the scroll
knob to select it.
NOTE:
The settings displayed will vary depending on the type of
header attached to the windrower.
3.
Scroll to highlight the appropriate option and press the
scroll knob to select it.
For example, if a draper header is attached, and
ATTACHMENTS (B) is selected, the available choice is
DOUBLE DRAPER DRIVE.
4.2.3
Checking Engine Speed
Check the idle speed and maximum speed of the engine to make sure it is running properly.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator
’
s seat for any reason.
DANGER
Ensure that all bystanders have cleared the area.
