215634
102
Revision B
1022911
B
A
B
Figure 3.126: Bezel Assembly
NOTE:
•
Retain center portion (A) of light bezel assembly for
reinstallation when the ballast is removed.
•
Install six hex screws (B) on side bezels for safekeeping. These
hex screws will be used when reinstalling the center portion
of the light bezel.
1022921
A
E
B
C
D
E
E
F
F
Figure 3.127: Weights Installed
CAUTION
To avoid injury, keep fingers clear of weight bracket when
installing weights.
3.
Install weights (A) from the outboard side and slide to the
middle of the bracket on the walking beam.
4.
Install retaining bracket (B) on each side of the weight
bundle.
IMPORTANT:
Ensure retaining bracket (B) engages slot (C) in the bracket.
5.
Install rod (D) through retaining bracket and weights with
spacers (E) as required.
6.
Secure with nuts (F) and tighten.
1018705
A
B
C
D
E
F
Figure 3.128: Base Kit
–
163 kg (360 lb.)
IMPORTANT:
Ensure nuts (F) are flush with the rod.