215634
170
Revision B
1.
Lower the header fully.
2.
Shut down the engine, and remove the key from the ignition.
1015479
A
B
Figure 5.29: Left Cab-Forward Platform
3.
Approach platform (A) on the left cab-forward side of the
windrower and ensure the cab door is closed.
4.
Push latch (B), and pull platform (A) toward the walking
beam until it stops and the latch engages.
1019465
A
B
C
D
E
Figure 5.30: Knife/Reel Drive Multicoupler
5.
Push lock button (A) and pull handle (B) to disengage
multicoupler (C). Disconnect the hydraulics from the rear
knife/reel drive receptacle.
NOTE:
Firmly hold handle (B) when disconnecting multicoupler (C).
Pressure may cause the handle to kick back with force.
6.
Route knife/reel drive hose bundle back to storage
position (D) on the hydraulic hose management system.
7.
Remove any debris that may have accumulated on the
receptacle. Close cover (E).
1015768
A
B
C
D
E
Figure 5.31: Draper/Reel Multicoupler
8.
Push lock button (B), and pull handle (C) to disengage
multicoupler (A). Disconnect the hydraulics from the
windrower draper drive/reel lift receptacle.
9.
Disconnect electrical connector (E).
10. Remove any debris that may have accumulated on the
windrower front receptacle, and close cover (D).