MacDon M105, Operator'S Manual

Page: 80 / 384

OPERATOR’S STATION
Display (lower or upper line) Description
##.# HEADER ANGLE
##.# HEADER SENSOR (
fl ashing)
Angle setting (00.0–10.0) header relative to ground. Optional
9
.
Sensor Disabled.
##.# VOLTS Engine electrical system operating voltage.
FUEL | ■■■■ | ■■■■ | Level of fuel in tank.
ENGINE TEMP ### °F
ENGINE TEMP ### °C (if metric) Engine coolant temperature.
SCROLL
SUB-MENU (lower line lnly)
#### KNIFE SPEED
##.# HEADER HEIGHT
##.## ##.# REEL IND
##.# ##.# DRAP INDX Displays sub-menu after 2–3 seconds. Press SELECT to cancel.
Scroll through sub-menu display with CDM switch.
Optional
9
##.## REEL MIN RPM (lower line) Reel speed drops below programmed set-point.
MINIMUM (lower line) Optional
9
Miscellaneous Operational Information
Scroll through display with cab display module (CDM) switch or ground speed lever (GSL) switch.
Display (upper line) Description
< LEFT TURN ■ Indicates left turn when left arrow is pressed on CDM.
■ RIGHT TURN > Indicates right turn when right arrow is pressed on CDM.
■ HAZARD ■
Indicates hazard warning lights are ON when hazard button is pressed
on CDM.
ROAD GEAR With High Range selected on Console switch.
HEADER ENGAGED Header drive engaged (engine will not start).
CENTER STEERING Center steering wheel and/or GSL not in N-DETENT.
169890
66
Revision A