1. Open the hood. Refer to
2. Open the platform. Refer to
3. Remove the radiator cap (A).
IMPORTANT:
Turn the cap (A) counterclockwise to the
fi
rst notch to
relieve pressure before removing cap completely.
4. Check the coolant in the radiator using an antifreeze
tester.
Tester should indicate protection to
temperatures of -30°F (-34°C).
5. Inspect the radiator cap before reinstalling, refer to
Inspecting Radiator Cap, page 245
.
6. Replace radiator cap (A).
7. Close the platform. Refer to
8. Close the hood. Refer to
Figure 5.94: Engine Cooling System
Checking Coolant Level
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
Check coolant level in the coolant recovery tank daily.
1. Stop the engine and remove the key.
2. Open the hood. Refer to
5.4.3 Opening Hood (Highest Position), page 203
.
3. Open the platform. Refer to
5.5.1 Opening Platform (Standard Position), page 205
.
NOTE:
To view coolant capacities, refer to
Lubricants, Fluids, and System Capacities, page 199
4. Close the platform. Refer to
5. Close the hood. Refer to
Figure 5.95: Engine Cooling System
169890
246
Revision A
Summary of Contents for M105
