MacDon M105, Operator'S Manual

Page: 78 / 384

OPERATOR’S STATION
Display (Lower or Upper Line) Description
###### TOTAL ACRES
###### TOTAL HECT (if Metric) Total area cut by machine.
##.## REEL RPM
##.## REEL SENSOR (Flashing) Reel rotational speed. Optional
7
Sensor disabled.
##.# AUGER SPEED Auger rotational speed (4.7–9.9).
#### KNIFE SPEED
#### KNIFE SENSOR (Flashing) Knife speed In strokes per minute. Optional
7
.
Sensor disabled.
##.# HEADER HEIGHT
##.# HEADER SENSOR (Flashing) Distance setting (00.0–10.0) between cutterbar and ground.
Sensor disabled.
##.# HEADER ANGLE
##.# ANGLE SENSOR Angle setting (00.0–10.0) header relative to ground. Optional
7
.
Sensor disabled.
##.# VOLTS Engine electrical system operating voltage.
FUEL| ■■■■ | ■■■■ | Level of fuel in tank.
ENGINE TEMP ### °F
ENGINE TEMP ### °C (if Metric) Engine coolant temperature.
SCROLL
SUB-MENU (Lower Line Only)
#### KNIFE SPEED
##.# AUGER SPEED
##.## REEL RPM
##.# HEADER HEIGHT Displays sub-menu after 2–3 Seconds. Press SELECT to cancel. Scroll
through sub-menu display with CDM switch.
Knife speed is optional
7
.
Reel rpm is optional
7
.
Engine Running, Header Engaged, Draper Header, Index Switch OFF
Scroll through display with cab display module (CDM) switch or ground speed lever (GSL) switch.
Display (lower or upper line) Description
#####.# ENGINE HRS
Total engine operating time.
#####.# UNIT HRS Total windrower operating time.
#####.# HEADER HRS Total header operating time.
##.# ACRES/HOUR
##.# HECTARES/HOUR (if metric) Actual cutting rate in acres (hectares)/hour.
###.# SUB ACRES
###.# SUB HECTARES (if metric) Area cut since last reset. To reset, display SUB ACRES on lower line,
and hold down program switch until display resets (5–7 seconds).
###### TOTAL ACRES
###### TOTAL HECT (if metric)
Total area cut by machine.
##.## REEL MPH or REEL RPM
##.## REEL KPH (if metric)
##.## REEL SENSOR (
fl ashing)
Reel peripheral speed in miles per hour or rpm. Optional.
8
.
Sensor Disabled.
##.# DRAPER SPEED Draper speed (0.0–10.0).
7. Optional: Available with Expansion Module installation – Whole Goods Bundle MD #B4666.
8. Optional: Available with Expansion Module Installation – Whole Goods Bundle MD #B4666.
169890
64
Revision A