![background image](http://html.mh-extra.com/html/macdon/m-series/m-series_unloading-and-assembly-instructions_685706092.webp)
8.
From above the machine, locate plug (A) on the top of
the traction drive pump housing.
9.
Loosen plug (A) to bleed the pump housing. Retighten
the plug once oil starts to run out.
10. Replace the hydraulic oil reservoir filler cap.
Figure 3.116: Traction Drive Pump Housing
11. Open the left-hand (cab-forward) platform.
12. Disconnect the brake engage solenoid plug (P44) (A)
at the multifunction block on the left-hand side of
the windrower.
Figure 3.117: Multifunction Control Block
147962
78
Revision A