![background image](http://html.mh-extra.com/html/macdon/m-series/m-series_unloading-and-assembly-instructions_685706221.webp)
7.
Press
right
(C)
arrow
to
select
YES.
Press
SELECT (D).
• DWA AUTO UP/DOWN? is displayed on the
upper line.
• NO/YES is displayed on the lower line.
NOTE:
If the Operator selects YES, the DWA Auto-Up
function will be activated by the GSL Reel
Fore-Aft button.
8.
Press
right
(C)
arrow
to
select
YES.
Press
SELECT (D).
9.
Press PROGRAM to exit Programming Mode or
press SELECT to proceed to next WINDROWER
SETUP action.
Figure 4.124: M155 DWA Auto Up/Down
Figure 4.125: M205 DWA Auto Up/Down
4.4.13
Setting the Auto Raise Height
NOTE:
The header
MUST
be attached to the windrower to perform this procedure. The cab display module (CDM)
automatically adjusts its programming for each header.
147962
207
Revision A