7.
Press left (B) arrow to enable a sensor. Press right (C)
arrow to disable sensor. Press SELECT (D) to confirm
selection and move on to next sensor.
The following sensors are available:
• HEADER HT SENSOR
• HEADER TILT SENSOR
• KNIFE SPEED SENSOR
• REEL SPEED SENSOR
• HEADER FLOAT SENSOR
• OVERLOAD PRESSURE
10
• HYD OIL TEMP SENSOR
When sensors have been modified, press SELECT (D)
to display the EXIT SENSOR SETUP? selection.
Figure 4.247: M105 Header Sensors
Figure 4.248: M155 Header Sensors
Figure 4.249: M205 Header Sensors
8.
Press right arrow to select YES. Press SELECT.
9.
Press PROGRAM to exit Programming Mode or press
SELECT to proceed to next DIAGNOSTIC MODE.
10. Requires installation of optional pressure sensor (MD #B5574).
147962
259
Revision A
