![background image](http://html.mh-extra.com/html/macdon/m-series/m-series_unloading-and-assembly-instructions_685706084.webp)
6.
Tighten both clamps (A) just enough to permit the
stack (B) to move.
Figure 3.103: Exhaust Stack under Hood
7.
Close the hood slowly so the stack (A) enters the
hole (B) in the hood. Adjust the position of the stack
as required to clear the hole in the hood.
Figure 3.104: Exhaust Stack Installed
8.
Raise the hood.
9.
Tighten clamps (A).
10. Reposition shroud (B) and tighten wing nut.
Figure 3.105: Exhaust Stack under Hood
147962
70
Revision A