13. Install pin (B) through the header leg (engaging
U-bracket in lift linkage) on both sides and secure with
hairpin (A).
14. Raise header stand (D) to storage position by pulling
spring pin (C) and lifting stand into uppermost position.
Release spring pin.
Figure 3.183: Header Leg
15. Remove clevis pin from storage position (B) in linkage
and insert into hole (A) to engage float springs. Secure
with hairpin.
Figure 3.184: Header Float Linkage
16. Disengage safety prop by turning lever (A) downwards
to release and lower stop until lever locks into
vertical position.
17. Repeat for opposite safety prop.
Figure 3.185: Safety Prop
147962
108
Revision A
