1.
Start the engine.
2.
Press PROGRAM (A) and SELECT (C) on cab display
module (CDM) to enter Programming Mode.
Figure 4.307: CDM Programming Buttons
3.
Press SELECT (B) until DIAGNOSTIC MODE? is
displayed in upper line.
• NO/YES is displayed on the lower line.
4.
Press right (A) arrow to select YES. Press SELECT (B).
CAUTION
Check to be sure all bystanders have cleared the area.
Figure 4.308: Diagnostic Functions
5.
Press SELECT (B) until ACTIVATE FUNCTIONS? is
displayed on the upper line.
• NO/YES is displayed on the lower line.
6.
Press right (A) arrow to select YES. Press SELECT (B).
Figure 4.309: Activate Functions
147962
285
Revision A
