3.21
Attaching Headers
3.21.1
Attaching Header Boots
Header boots are required to attach a D-Series draper header to the windrower. Attach header boots (supplied
with header) to windrower lift linkage if not already installed.
CAUTION
To prevent damage to the lift system when lowering
header lift linkages without a header or weight
box attached to the windrower, ensure the float
engagement pin is installed in storage position (B)
and NOT in engaged position (A).
Figure 3.155: Header Float Linkage
1.
Remove pin (B) from boot (A).
Figure 3.156: Header Boot
2.
Position boot (B) onto lift linkage (A) and reinstall
pin (C). Pin may be installed from either side of boot.
3.
Secure pin (C) with hairpin (D).
4.
Repeat for opposite side.
Figure 3.157: Header Boot
147962
97
Revision A
