MacDon M Series, Unloading And Assembly Instructions, Page: 197 / 396

CAB DISPLAY MODULE (CDM)
8. Press and hold FLOAT - button (A) on CDM.
• CALIBRATING FLOAT is displayed on the
upper line.
• FLOAT ( - ) HOLD is displayed on the lower line.
NOTE:
The word HOLD will flash during calibration.
HDR FLOAT COMPLETE will display on the
lower line once calibration is complete.
9. Release FLOAT - button (A).
• TO CALIBRATE SELECT is displayed on the
upper line.
• HEADER FLOAT is displayed on the lower line.
Figure 4.70: M155 Negative Header Float
Figure 4.71: M205 Negative Header Float
10. Press right arrow to select next header sensor
calibration or STOP & EXIT. Press SELECT
Refer to
4.3.1 Calibrating the Header Height Sensor,
page 172 or 4.3.2 Calibrating the Header Tilt Sensor,
page 176 .
11. Press PROGRAM to exit Programming Mode.
147962
183
Revision A