![background image](http://html.mh-extra.com/html/macdon/m-series/m-series_unloading-and-assembly-instructions_685706256.webp)
1.
Turn ignition key to RUN, or start the engine.
2.
Press PROGRAM (A) and SELECT (C) on cab display
module (CDM) to enter Programming Mode.
• WINDROWER
SETUP?
is
displayed
on
the
upper line.
• NO/YES is displayed on the lower line.
3.
Press right (B) arrow to select YES. Press SELECT (C).
• SET KNIFE SPEED? is displayed on the upper line.
• SELECT HEADER TYPE? is displayed on the
upper line.
Figure 4.203: M105 CDM Programming Buttons
Figure 4.204: M155 CDM Programming Buttons
Figure 4.205: M205 CDM Programming Buttons
147962
242
Revision A