MacDon M Series, Unloading And Assembly Instructions

Page: 393 / 396

Predelivery Checklist
Perform these checks and adjustments prior to delivery to your Customer. The completed checklist should be
retained by either the Operator or the Dealer.
CAUTION
Carefully follow the instructions given. Be alert for safety related messages that bring your attention to
hazards and unsafe practices.
Windrower Serial Number: Engine Serial Number:
Table 1 M-Series Self-Propelled Windrower Predelivery Checklist – Export

Item
Reference
Check for shipping damage or missing parts. Be sure all
shipping dunnage is removed.
—
Check for loose hardware. Tighten to required torque. 6 Reference, page 357
Check tire air pressures and adjust as required. 5.3.1 Checking Tire Pressures, page 322
Check final drive hub lubricant level.
5.2 Checking and Adding Wheel Drive Lubricant
Level, page 321
Check engine coolant level and strength at reserve tank. 5.7 Checking Engine Coolant, page 329
Check air cleaner and clamps. 5.4 Checking Engine Air Intake, page 324
Check hydraulic oil level and check for leaks along lines. 5.5 Checking Hydraulic Oil, page 327
Check fuel separator for water and foreign material. Drain
and clean as necessary. Add fuel.
5.6 Checking Fuel Separator, page 328
Check gearbox lubricant level (M155 and M205).
5.8 Checking Gearbox Lubricant Level on an
M155/M205, page 330
Check tension of air conditioning compressor belt.
5.9 Checking Air Conditioning (A/C) Compressor
Belts, page 331
Check that machine is completely lubricated. 3.22 Lubricating the Windrower, page 150
Check neutral interlock system. 5.10 Checking Safety System, page 332
Check engine oil pressure indicator light at cab display
module (CDM). 5.11.1 Checking Engine Warning Lights, page
336
Start engine and run to operating temperature. 5.11.3 Checking Windrower Startup, page 337
Check CDM for operation.
5.11.5 Checking Gauges and Cab Display
Module (CDM) Display, page 338
Check Operator’s Presence System.
5.11.8 Checking Operator's Presence System,
page 341
Check alternator charge rate on CDM. 5.11.7 Checking Electrical System, page 340
Check fuel gauge/indicator for operation.
5.11.5 Checking Gauges and Cab Display
Module (CDM) Display, page 338
Check that air conditioning is functioning properly.
5.11.12 Checking Air Conditioning (A/C) and
Heater, page 350
147962
379
Revision A