Liquid Controls LectroCount LCR 600, Installation-Parts

Page: 38 / 78

Installation
·
If the cables are shortened, ensure that you use the proper tool for stripping off the insulation on the
cables.
· Make sure cables are connected to the proper terminal.
Guidelines for routing the data and power cables inside
the cab
· Before you begin, layout positions for the component and pathways for the cable.
·
Ensure that the printer and the wires will not obstruct other vehicle components.
·
Keep cable pathways away from heavy traffic areas and locations where they may be vulnerable to
damage.
·
Remember to provide plenty of room around the components, so the cables can be easily
connected.
· Avoid installing the cable where it will be exposed to excessive flexing.
· Ensure that cables are not pulled too tight in areas that will move. For example, when wiring cab-
over trucks, leave enough slack so the cab can be tilted without damaging the cable.
· Ensure cables are not fastened to adjustable seats.