Liquid Controls LectroCount LCR 600, Installation-Parts

Page: 58 / 78

Installation
Differential Pressure Transducer
Differential Pressure (∆P) Transducer Installation
When ordered as part of a meter system with a LCR 600, Liquid Control’s ∆P transducer is wired to the
LCR 600 at the factory. The ∆P transducer can also be ordered separately and installed onto a meter
system already in service. Refer to the ∆P transducer manual for complete installation instructions.
Instructions for wiring the ∆P transducer to the LCR 600 can be found below.
The ∆P Transducer requires an additional board (PN 81944) that mounts directly to the LCR 600 CPU
board.
Typically, a ∆P transducer operates together with a shutdown device, such as a valve or a dead-man.
Do NOT Try to Remove J2
The J2 terminal block is permanently attached to the CPU board.
Be Especially Careful with the CPU Board