Linhai ATV 500-D T3 EFI, Service Manual

Page: 25 / 291

CHAPTER 2 MAINTENANCE
LH500ATV-D T3 EFI SERVICE MANUA 19.0
CHAPTER 2 MAINTENANCE PAGE. 2- 12
2.4 BRAKING SYSTEM
INSPECTION
The following checks are recommended to
keep the braking system in good operating
condition. Service life of braking system
components depends on operating conditions.
Inspect brakes in accordance with the
maintenance schedule and before each ride.
 Keep fluid level in the master cylinder
reservoir to the indicated level on reservoir.
 Use DOT 3 brake fluid.
NOTE: Use new brake fluid or brake fluid
from a sealed container to avoid
contamination to system.
 Check brake system for fluid leaks.
 Check brake for excessive travel or spongy
feel.
 Check friction pads for wear, damage and
looseness.
 Check surface condition of the disc.
BRAKE PAD INSPECTION

Pads should be changed when friction
material is worn to 3/64" (1mm).
HOSE/FITTING INSPECTION
Check braking system hoses and fittings for
cracks, deterioration, abrasion, and leaks.
Tighten any loose fittings and replace any
worn or damaged parts.
FOOT BRAKE ADJUSTMENT
NOTE
On European ATV 260 / 300 and B-type , foot
brake is the SERVICE brake (MAIN brake)
Use the following procedure to inspect the
hydraulic foot brake system and adjust or
bleed if necessary.