Linhai ATV 500-D T3 EFI, Service Manual

Page: 228 / 291

CHAPTER 5 FINAL DRIVE
LH500ATV-D T3 EFI SERVICE MANUAL 19.0
CHAPTER 5 FINAL DRIVE. 5- 24
18 DRIVE CLUTCH COVER 44 PIN
19 GEAR CASE, FRONT AXLE 45 DRIVEN GEAR
20 JOINT, BREATHER PIPE 46 WASHER
21 BREATHER PIPE 47 SHIM
22 WIRE CLAMP A7 48 ADJUST SHIM
23 DRAIN BOLT 49 TOP BRACKET,DIFFERENTIAL GEAR
24 WASHER 10 50
25 OIL SEAL 51 BEARING 6007
26 CASE COVER, FRONT AXLE 52 WEARING RING
5.9 FRONT GEARCASE DISASSEMBLY
Important: Before staring any operation
On the gearbox make sure GEAR MOTOR A is
protected (if mounted). Never clean the gearbox
with a high pressure water jet.
→Fig 0.
Fig 0
1. Remove the DRAIN BOLT A and let the oil
drain from the gearbox.
Important: Clean the plug carefully and
Replace WASHER 10 B before
Its assembled. →Fig 1.
Fig 1
2. Remove the COUPLER A.
→Fig 2.
Fig 2
3. Remove the O-RING A .
→Fig 3.