Linhai ATV 500-D T3 EFI, Service Manual

Page: 225 / 291

CHAPTER 5 FINAL DRIVE
LH500ATV-D T3 EFI SERVICE MANUAL 19.0
CHAPTER 5 FINAL DRIVE. 5- 21
13. Mount the coupler of the rear axle f with
the bevel gear-driving V.
Mount the washer 12.5×30×4 g.
Apply some Loctite 242 threadlocker on
screw thread
.
Tighten the nut M12×1.25 h to a torque of
50~60N.m .
→Fig 13
Fig 13
14. Mount the oil seal 65×90×9 j in the ring
gear bearing housing C on the right .
→Fig 14
Fig 14
15. Mount the oil seal k in the ring gear bearing
housing G on the left .
Make the O-ring m on the fill plug n .
Tighten the fill plug n to a torque of
35~40N.m .
→Fig 15
Fig 15