Linhai ATV 500-D T3 EFI, Service Manual

Page: 138 / 291

CHAPTER 3 ENGINE
LH500ATV-D T3 EFI SERVICE MANUA 19.0
CHAPTER 3 ENGINE PAGE. 3- 105
Oil Filter
Install oil filter bolt and tighten to the specified
torque;
Oil filter bolt tightening torque: 36 N·m
Apply engine oil to O-ring;
Install oil filter, turn it by hand until the filter gasket
contacts the mating surface. Tighten the bolts to the
specified torque.
Tool: Oil Filter Wrench
Starting Motor
Apply engine oil to new O-ring;
Install starting motor;
Install bolt and tighten to the specified torque
Tightening torque: 10N·m
Engine Top Side
Piston
Install the piston rings in the order of oil ring,
②
ring
and
①
ring.;
The first member to go into the oil ring groove is
spacer
①
, after placing the spacer, fit the two side
rails ② .
Warning: when installing the spacer
①
, do not overlap its
two ends in the groove.
Install the second ring A and first ring B
Note: 1st ring and 2nd ring differ in shape