Linhai ATV 500-D T3 EFI, Service Manual

Page: 160 / 291

CHAPTER 3 ENGINE
LH500ATV-D T3 EFI SERVICE MANUA 19.0
CHAPTER 3 ENGINE PAGE. 3- 127
3.6.2.3.3 Technical Parameters
Throttle Position Sensor:
Reference voltage: 5±0.1VDC
Resistance between T1 and T2: 3k~12kΩ
Idle Air Control Valve:
Operating voltage: 7.5~14.2 VDC
Solenoid resistance: 53Ω±10%
Solenoid inductance: 33mH±20%
3.6.2.3.4 Operating Conditions
Normal Operating Temperature: -30~120°C
3.6.2.3.5 Throttle Body Removal
Disconnect negative terminal of the battery
Disconnect electric lead wire of throttle position sensor coupler, stepper motor
coupler and MAP/MAT sensor coupler ( if this sensor is mounted on the throttle
body)
Disconnect accelerator cable from throttle body