P/N 1389990 Rev B (ECN 32099)
27
Spread Spectrum Installation Guide
4.7 Verify System Operation
Perform the following checks to verify the operation of the FieldNET system.
1. Log on to the account the Bridge is registered under.
2. Click on the Devices tab and List. Ever pivot RTU must be listed.
3. From the Devices tab click on Communication. The Bridge communication
health must not s
how “no communication”.
4. Each device must respond when “ping” is clicked. If any devices fail to ping
then review the installation of that device and refer to the trouble shooting section
in the Appendix.
