3.
Drive to accumulate at least four (4) minutes
in the range of 30-45 mph (50-70 km/h). If
stop and go conditions occur, the
accumulative time must be within the 30-45
mph (50-70 km/h) range. No wide open
throttle conditions should be encountered.
4.
Cruise and maintain a select speed in the range
of 30-40 mph (48-64 km/h) on a level road
with throttle held very steady for at least one
(1) minute.
5.
Decelerate and idle for at least 80 seconds.
6.
Accelerate to 55 mph (90 km/h) at ½ throttle.
7.
Decelerate at closed throttle for I 0 seconds.
8. Cruise and maintain a select speed in the range
of 40-65 mph (64-105 km/h) on a level road
with throttle held very steady for at least 80
seconds.
9. Complete 10 minutes of city driving 25-40 mph
(40-64 kin/h) with at least six (6) stops.
10. OBD II drive cycle has been completed.
Vehicle can be turned off when convenient.
Refill Capacities, Motorcraft Parts,
and Lubricant Specifications
Refill Capacities
Component
U.S.
Metric
Cooling system
(including heater)
14.25 qts.
13.5 liters
Engine oil
(with filter change)
6.0 qts.
5.7 liters
Transaxle
Auto. overdrive
13.7 qts.
13.0 liters
Power steering
2.5 pints
1.2 liters
Fuel tank
17.8 gallons
67.4 liters
Pressure cap
16 psi
I 10 kPa
287
Summary of Contents for 1996 Continental
